SPCC Oil Containment using SPI Petro-Barriers™ for water drainage and XR5 Liners

Solidification Products International 2020-02-18 00:00:00

Choose the right company for your SPCC oil containment.  Solidification Products International (SPI) has supplied cost effective, innovative, reliable products and systems since 1991.  SPI's Petro Barriers are installed worldwide providing rain water drainage with 100% oil spill containment during a catastrophic oil spill event.  No oil has ever been released by any SPI system or product during transformer explosions or oil spill releases. All SPI products have been thoroughly Laboratory tested in the United States, Canada and Europe to certify they work as described.  In a low-level oil sheen test, the sheen ran through the SPI media for over 18 months and oil was non-detectable. All laboratory tests are available upon request.

SPI products are versatile components for oil containment utilizing concrete moats or fabric liner systems.  SPI liners are a cost-effective option over concrete for certain applications and site conditions and can provide oil containment for 30 years or more.  SPI's XR5 liners used in conjunction with

Petro-Pipes® or Petro Barriers are exemplary 100% reliable oil containment solutions.  BEWARE, many competitor liners look similar, but are made with inferior liner fabric which may not be compatible with various oils and fuels.  Additionally, many competitors use adhesives, tape or poor connection methods which do not have the stamina to withstand severe weather conditions.  Why choose cheap imitations when SPI can provide your company with laboratory proven Patented products that have an established track record.

All Liners use by SPI have the following benefits:

  • 100% Sealed Systems
  • Custom Designed to Meet Your Specifications
  • Clean Ergonomic Designs
  • Exceptionally Strong XR-5 Material
  • SPI Liners Satisfy All EPA and State Regulations
  • Chemical, Hydrocarbon and UV Resistant
  • Factory RF Welded Seams, No Glues or Adhesives
  • Liners are Bolted in with Aluminum Strapping
  • Complete Water drainage through SPI Petro-Barrier
  • All field Seams tested with High Pressure air

In the pictures is a substation containment area using an SPI liner system for 2 transformers and a group of oil regulators. Each containment has 125% volume as required by SPCC regulations. There is one 24" diameter Petro-Barrier installed on the floor of each containment area. They all attached together with drainage pipe and brought to day light. Water drainage is 30 - 40 per minute from each area and each Petro-Barrier is accessible through the removable access cover on the stone surface of each containment area.

Day one: All bolts are installed into the concrete pads and a geo-textile is placed on the floor of each containment area.

Day two: The liner is laid out and all boots, concrete structures and corners are welded to the liner.

Day three: Second layer of geo-textile is installed over the liner and all attachments are secured to the concrete pads. The final step is to lance test all welder seams with high pressure air to make sure all welds are sealed and there are "0" leaks.

Before each containment area is back filled with clean crushed stone a 36" diameter perforated HDPE pipe is installed around each Petro-Barrier to provide access to each drainage system.

When the substation is completed the stone inside the station is level for access of vehicles and the black cover to each Petro-Barrier is visible in the picture.

Visit Solidification Products International, Inc at www.oilbarriers.com or call us at (203)484-9494.

For More Information Contact
Solidification Products International
United States,

IEEE Enewsletter